|
Blastline 06BSP Safety Pin, Pack of 10
|
|
Blastline NH1N Nylon 3/4" Hose ID Nozzle Holder
|
List Price: $5.99 Your Price: $3.99 Sale Price: $3.59 Your Savings: $2.40!
|
|
|
List Price: $11.99 Your Price: $10.99 Sale Price: $9.99 Your Savings: $2.00!
|
|
|
|
|
Blastline safety clips are necessary to ensure universal and sandblast couplings will not become accidentally disconnected. This guarantees the fittings are properly connected as the pin will not go through the holes in the mating flanges until couplings are locked in place. Only one safety clip is required for each coupling.
Sold in Packs of 10
|
Blastline NH1N Nylon 3/4" Hose ID Nozzle Holder, 1-1/2" Hose OD. These are sleeve type couplings and the end of the nozzle holder is NPT threaded to accept the sandblasting nozzle.
|
|
|
|
Blastline NH1A Aluminum 3/4" Hose ID Nozzle Holder
|
|
Blastline NH2N Nylon 1" Hose ID Nozzle Holder 1-7/8" OD
|
List Price: $12.99 Your Price: $11.99 Sale Price: $10.99 Your Savings: $2.00!
|
|
|
List Price: $13.99 Your Price: $12.99 Sale Price: $10.99 Your Savings: $3.00!
|
|
|
|
|
|
|
Blastline 06BNH1A Aluminum 3/4" Hose ID Nozzle Holder, 1-1/2" Hose OD. These are sleeve type couplings and the end of the nozzle holder is NPT threaded to accept the sandblasting nozzle.
|
Blastline NH2N Nylon 1" Hose ID Nozzle Holder, Blastline 06BNH2N, nozzle holder, aluminum nozzle holder, nozzle holder, NH2N
|
|
|
|
Blastline NH2N-50 Nylon 1" Hose ID Nozzle Holder 1-7/8" OD 50 MM Thread
|
|
Blastline NH2A Aluminum 1" Hose ID Nozzle Holder
|
List Price: $13.99 Your Price: $12.99 Sale Price: $10.99 Your Savings: $3.00!
|
|
|
List Price: $14.99 Your Price: $12.99 Sale Price: $11.99 Your Savings: $3.00!
|
|
|
|
|
|
|
Blastline NH2N-50 Nylon 1" Hose ID Nozzle Holder, Blastline 06BNH2N-50, nozzle holder, aluminum nozzle holder, nozzle holder, NH2N-50
|
Blastline 06BNH2A Aluminum 1" Hose ID Nozzle Holder, 1-7/8" Hose OD. These are sleeve type couplings and the end of the nozzle holder is NPT threaded to accept the sandblasting nozzle.
|
|
|
|
Clemco NHP-2 Nylon Nozzle Holders NHP-2 fits 1-inch ID 2-braid and 4-ply blast hose (1-7/8-inch OD) and 1-1/4-inch ID Supa hose
|
|
Blastline NH3N Nylon 1-1/4" Hose ID Nozzle Holder, OD 2-5/32"
|
List Price: $14.99 Your Price: $13.99 Sale Price: $11.99 Your Savings: $3.00!
|
|
|
List Price: $16.99 Your Price: $14.99 Sale Price: $12.99 Your Savings: $4.00!
|
|
|
|
|
|
Clemco fiber-reinforced nylon nozzle holder attaches to the end of a blast hose and holds a contractor-thread blast nozzle. NHP-2 fits 1-inch ID 2-braid and 4-ply blast hose (1-7/8-inch OD) and 1-1/4-inch ID Supa hose
|
Blastline NH3N Nylon 1-1/4" Hose ID Nozzle Holder, 2-5/32" Hose OD. These are sleeve type couplings and the end of the nozzle holder is NPT threaded to accept the sandblasting nozzle
|
|
|
|
Blastline NH3A Aluminum 1-1/4" Hose ID Nozzle Holder
|
|
Clemco 04106 Nozzle Model # NHP-1 Nylon Holders
|
List Price: $18.99 Your Price: $16.99 Sale Price: $14.99 Your Savings: $4.00!
|
|
|
List Price: $19.99 Your Price: $16.99 Sale Price: $15.99 Your Savings: $4.00!
|
|
|
|
|
|
|
Blastline 06BNH3A Aluminum 1-1/4" Hose ID Nozzle Holder, 2-5/32" Hose OD. These are sleeve type couplings and the end of the nozzle holder is NPT threaded to accept the sandblasting nozzle.
|
Clemco fiber-reinforced nylon nozzle holder attaches to the end of a blast hose and holds a contractor-thread blast nozzle. NHP-1 fits 3/4-inch ID 2-braid hose, (1-1/2-inch OD) and 1-inch ID Supa hose
|
|
|
|
Blastline 06BQ4N Nylon 1-1/2" ID Hose End Couplings
|
|
Blastline NH1B Brass 3/4" Hose ID Nozzle Holder 1-1/2" Hose OD
|
List Price: $20.99 Your Price: $17.99 Sale Price: $15.99 Your Savings: $5.00!
|
|
|
List Price: $19.99 Your Price: $17.99 Sale Price: $15.99 Your Savings: $4.00!
|
|
|
|
|
|
Blastline 06BQ4N Nylon 1-1/2" ID Hose End Couplings, 2-3/8" Hose OD. These couplings are used to make hose to hose connection or hose to blast pot connections. Sleeve type couplings that fit over the OD of the sandblast hose.
|
Blastline NH1B Brass 3/4" Hose ID Nozzle Holder, 1-1/2" Hose OD. These are sleeve type couplings and the end of the nozzle holder is NPT threaded to accept the sandblasting nozzle.
|
|
|
|
Blastline NH2B Brass 1" Hose ID Nozzle Holder 1-7/8" OD
|
|
Blastline Q1A Aluminum 3/4" ID Hose End Couplings
|
List Price: $19.99 Your Price: $17.99 Sale Price: $15.99 Your Savings: $4.00!
|
|
|
List Price: $19.99 Your Price: $17.99 Sale Price: $16.99 Your Savings: $3.00!
|
|
|
|
|
|
|
Blastline NH2B Brass 1" Hose ID Nozzle Holder, Blastline 06BNH2B, nozzle holder, aluminum nozzle holder, nozzle holder, NH2B
|
Blastline 06BQ1A Aluminum 3/4" ID Hose End Couplings, 1-1/2" Hose OD. These couplings are used to make hose to hose connection or hose to blast pot connections. Sleeve type couplings that fit over the OD of the sandblast hose.
|
|
|
|
Blastline Q2A Aluminum 1" ID Hose End Couplings
|
|
Clemco 08414 CQP-3 Nylon Quick Couplings
|
List Price: $19.99 Your Price: $17.99 Sale Price: $16.99 Your Savings: $3.00!
|
|
|
List Price: $21.99 Your Price: $16.99 Your Savings: $5.00!
|
|
|
|
|
|
|
Blastline 06BQ2A Aluminum 1" ID Hose End Couplings, 1-7/8" Hose OD. These couplings are used to make hose to hose connection or hose to blast pot connections. Sleeve type couplings that fit over the OD of the sandblast hose.
|
CQP-3 fits 1 1/4" ID x 25/32" OD hose. Clemco fiber-reinforced nylon quick couplings attach to blast hose to facilitate connecting blast hose to blast machine, blast hose to blast hose, and blast hose to quick-coupling nozzle holders. CQP Couplings include gasket, screws and lock spring.
|
|
|
|
Clemco 21711 CQP-2 Nylon Quick Couplings
|
|
Blastline Q2N Nylon 1" ID Hose End Couplings
|
List Price: $19.99 Your Price: $17.99 Sale Price: $16.99 Your Savings: $3.00!
|
|
|
List Price: $19.99 Your Price: $17.99 Sale Price: $16.99 Your Savings: $3.00!
|
|
|
|
|
|
CQP-2 fits 1" ID x 17/8" OD hose. Clemco fiber-reinforced nylon quick couplings attach to blast hose to facilitate connecting blast hose to blast machine, blast hose to blast hose, and blast hose to quick-coupling nozzle holders. CQP Couplings include gasket, screws and lock spring.
|
Blastline 06BQ2N Nylon 1" ID Hose End Couplings, 1-7/8" Hose OD. These couplings are used to make hose to hose connection or hose to blast pot connections. Sleeve type couplings that fit over the OD of the sandblast hose.
|
|
|
|
Blastline Q1N Nylon 3/4" ID Hose End Couplings
|
|
Clemco NHP-3 Nylon Nozzle Holders
|
List Price: $18.99 Your Price: $17.99 Sale Price: $16.99 Your Savings: $2.00!
|
|
|
List Price: $21.99 Your Price: $18.99 Sale Price: $17.99 Your Savings: $4.00!
|
|
|
|
|
|
|
Blastline 06BQ1N Nylon 3/4" ID Hose End Couplings, 1-1/2" Hose OD. These couplings are used to make hose to hose connection or hose to blast pot connections. Sleeve type couplings that fit over the OD of the sandblast hose.
|
Clemco fiber-reinforced nylon nozzle holder attaches to the end of a blast hose and holds a contractor-thread blast nozzle. NHP-3 fits 1-1/4-inch ID 2-braid and 4-ply blast hose (2-5/32-inch OD)
|
|
|
