|
Blastline 06BSP Safety Pin, Pack of 10
|
|
Blastline SM050 1/2" Tube Mender
|
List Price: $5.99 Your Price: $3.99 Sale Price: $3.59 Your Savings: $2.40!
|
|
|
List Price: $8.99 Your Price: $7.99 Sale Price: $5.99 Your Savings: $3.00!
|
|
|
|
|
Blastline safety clips are necessary to ensure universal and sandblast couplings will not become accidentally disconnected. This guarantees the fittings are properly connected as the pin will not go through the holes in the mating flanges until couplings are locked in place. Only one safety clip is required for each coupling.
Sold in Packs of 10
|
Blastline 06BSM050 1/2" Tube Mender. Hose Menders Repair Hoses. To do so you must cut out the damaged hose portion, insert each end of the mender (shanks) into the remaining good ends of the hose. Secure the hose menders with bands or DB double bolt clamps. Each end will accommodate two or more bands or two clamps for an economical and efficient return to service. Made of Plated Steel.
|
|
|
|
Dixon 3/4" Spring Guard
|
|
Blastline SM075 3/4" Tube Mender
|
List Price: $10.20 Your Price: $6.73 Your Savings: $3.47!
|
|
|
List Price: $9.99 Your Price: $7.99 Sale Price: $6.99 Your Savings: $3.00!
|
|
|
|
|
|
Dixon 3/4" Spring Guard, 7/8" to 15/16" Hose OD. 12" Length, Approx # of Coils: 33. Protects hose againist the effects of flexing at its most vulnerable point-immediately behind the coupling. End 'tang' allows end guard to be secured under a clamp or ferrule. Made of half-round galvanized steel wire to fit hose OD's from 7/8" to 3".
|
Blastline 06BSM075 3/4" Tube Mender. Hose Menders Repair Hoses. To do so you must cut out the damaged hose portion, insert each end of the mender (shanks) into the remaining good ends of the hose. Secure the hose menders with bands or DB double bolt clamps. Each end will accommodate two or more bands or two clamps for an economical and efficient return to service. Made of Plated Steel.
|
|
|
|
Dixon 1" Spring Guard
|
|
DIXON PPH75 Polypropylene Cam and Groove Couplers Type H dust cap
|
List Price: $11.33 Your Price: $7.23 Your Savings: $4.10!
|
|
|
List Price: $14.50 Your Price: $7.61 Your Savings: $6.89!
|
|
|
|
|
|
Dixon 1" Spring Guard, 15/16" to 1-1/4" Hose OD. 12" Length, Approx # of Coils: 33. Protects hose againist the effects of flexing at its most vulnerable point-immediately behind the coupling. End 'tang' allows end guard to be secured under a clamp or ferrule. Made of half-round galvanized steel wire to fit hose OD's from 7/8" to 3".
|
DIXON PPH75 Polypropylene Cam and Groove Couplers Type H dust cap Size: 3/4" Dust caps and dust plugs are not to be used in pressure applications for safety and environmental reasons.
|
|
|
|
Blastline SM100 1" Tube Mender
|
|
DIXON PPH100 Polypropylene Cam and Groove Couplers Type H dust cap
|
List Price: $10.99 Your Price: $9.99 Sale Price: $7.99 Your Savings: $3.00!
|
|
|
List Price: $16.65 Your Price: $8.75 Your Savings: $7.90!
|
|
|
|
|
|
Blastline 06BSM100 1" Tube Mender. Hose Menders Repair Hoses. To do so you must cut out the damaged hose portion, insert each end of the mender (shanks) into the remaining good ends of the hose. Secure the hose menders with bands or DB double bolt clamps. Each end will accommodate two or more bands or two clamps for an economical and efficient return to service. Made of Plated Steel.
|
DIXON PPH100 Polypropylene Cam and Groove Couplers Type H dust cap Size: 1" Dust caps and dust plugs are not to be used in pressure applications for safety and environmental reasons.
|
|
|
|
Blastline SM125 1-1/4" Tube Mender
|
|
Dixon 1-1/2" Spring Guard
|
List Price: $11.99 Your Price: $9.99 Sale Price: $8.99 Your Savings: $3.00!
|
|
|
List Price: $15.86 Your Price: $9.05 Your Savings: $6.81!
|
|
|
|
|
|
Blastline 06BSM125 1-1/4" Tube Mender. Hose Menders Repair Hoses. To do so you must cut out the damaged hose portion, insert each end of the mender (shanks) into the remaining good ends of the hose. Secure the hose menders with bands or DB double bolt clamps. Each end will accommodate two or more bands or two clamps for an economical and efficient return to service. Made of Plated Steel.
|
Dixon 1-1/2" Spring Guard, 1-1/2" to 1-3/4" Hose OD. 14" Length, Approx # of Coils: 39. Protects hose againist the effects of flexing at its most vulnerable point-immediately behind the coupling. End 'tang' allows end guard to be secured under a clamp or ferrule. Made of half-round galvanized steel wire to fit hose OD's from 7/8" to 3".
|
|
|
|
Blastline SM150 1-1/2" Tube Mender
|
|
DIXON PPH150 Polypropylene Cam and Groove Couplers Type H dust cap
|
List Price: $12.99 Your Price: $10.99 Sale Price: $9.99 Your Savings: $3.00!
|
|
|
List Price: $20.34 Your Price: $10.67 Your Savings: $9.67!
|
|
|
|
|
|
Blastline 06BSM150 1-1/2" Tube Mender. Hose Menders Repair Hoses. To do so you must cut out the damaged hose portion, insert each end of the mender (shanks) into the remaining good ends of the hose. Secure the hose menders with bands or DB double bolt clamps. Each end will accommodate two or more bands or two clamps for an economical and efficient return to service. Made of Plated Steel.
|
DIXON PPH150 Polypropylene Cam and Groove Couplers Type H dust cap Size: 1-1/2" Dust caps and dust plugs are not to be used in pressure applications for safety and environmental reasons.
|
|
|
|
Blastline SM200 2" Tube Mender
|
|
Dixon 2" Spring Guard
|
List Price: $14.99 Your Price: $12.99 Sale Price: $10.99 Your Savings: $4.00!
|
|
|
List Price: $22.66 Your Price: $14.44 Your Savings: $8.22!
|
|
|
|
|
|
Blastline 06BSM200 2" Tube Mender. Hose Menders Repair Hoses. To do so you must cut out the damaged hose portion, insert each end of the mender (shanks) into the remaining good ends of the hose. Secure the hose menders with bands or DB double bolt clamps. Each end will accommodate two or more bands or two clamps for an economical and efficient return to service. Made of Plated Steel.
|
Dixon 2" Spring Guard, 2" to 2-1/2" Hose OD. 16" Length, Approx # of Coils: 44. Protects hose againist the effects of flexing at its most vulnerable point-immediately behind the coupling. End 'tang' allows end guard to be secured under a clamp or ferrule. Made of half-round galvanized steel wire to fit hose OD's from 7/8" to 3".
|
|
|
|
Blastline SM250 2-1/2" Tube Mender
|
|
DIXON PPH200 Polypropylene Cam and Groove Couplers Type H dust cap
|
List Price: $18.99 Your Price: $16.99 Sale Price: $14.99 Your Savings: $4.00!
|
|
|
List Price: $26.99 Your Price: $15.99 Your Savings: $11.00!
|
|
|
|
|
|
Blastline 06BSM250 2-1/2" Tube Mender. Hose Menders Repair Hoses. To do so you must cut out the damaged hose portion, insert each end of the mender (shanks) into the remaining good ends of the hose. Secure the hose menders with bands or DB double bolt clamps. Each end will accommodate two or more bands or two clamps for an economical and efficient return to service. Made of Plated Steel.
|
DIXON PPH200 Polypropylene Cam and Groove Couplers Type H dust cap Size: 2" Dust caps and dust plugs are not to be used in pressure applications for safety and environmental reasons.
|
|
|
|
Blastline SM300 3" Tube Mender
|
|
Whipcheck Cable,Safety,1/8 In
|
List Price: $26.99 Your Price: $19.99 Sale Price: $17.99 Your Savings: $9.00!
|
|
|
List Price: $39.99 Your Price: $25.99 Sale Price: $19.99 Your Savings: $20.00!
|
|
|
|
|
|
Blastline 06BSM300 3" Tube Mender. Hose Menders Repair Hoses. To do so you must cut out the damaged hose portion, insert each end of the mender (shanks) into the remaining good ends of the hose. Secure the hose menders with bands or DB double bolt clamps. Each end will accommodate two or more bands or two clamps for an economical and efficient return to service. Made of Plated Steel.
|
Safety Cable, Cable Diameter 1/8 Inch, Hose Inside Diameter 1/2-1 1/4 Inches, Length 20 1/4 Inches, Hose to Hose Service
|
|
|
|
DIXON PPH300 Polypropylene Cam and Groove Couplers Type H dust cap
|
|
Whipcheck Cable,Safety,1/4 In
|
List Price: $39.55 Your Price: $20.76 Your Savings: $18.79!
|
|
|
List Price: $55.99 Your Price: $29.99 Sale Price: $24.99 Your Savings: $31.00!
|
|
|
|
|
|
DIXON PPH300 Polypropylene Cam and Groove Couplers Type H dust cap Size: 3" Dust caps and dust plugs are not to be used in pressure applications for safety and environmental reasons.
|
Safety Cable, Cable Diameter 1/4 Inch, Hose Inside Diameter 1 1/2-3 Inches, Length 38 Inches, Hose to Hose Service
Help to prevent hose whip if couplings or clamp devices accidentally separate.
Max. working pressure: 200 psi for air only.
|
|
|
