Ingersoll-Rand BAW005060 Pneumatic Balancer, BA Series, Capacity (lbs) 50
|
|
Ingersoll-Rand BW015080 Balancer Air Basic Balancer With Z-Brake, 150 lb Cap
|
List Price: $1,610.11 Your Price: $1,288.09 Your Savings: $322.02!
|
|
|
List Price: $2,728.17 Your Price: $2,182.54 Your Savings: $545.63!
|
|
|
|
|
Ingersoll-Rand BAW005060 Pneumatic Balancer, BA Series, Capacity at 100 PSI (lbs): 50, Single Set-Up, Includes Clevis Mounting, Not Available with Z-Stop
Ingersoll Rand "BA" series balancers have no pendant controls and are used for single load suspending applications either at a fixed height or where both hands are used to manually raise, lower and position or “Float” a load. The operator experiences virtually no part weight or resistance in manipulating the load.
The “BA” controller is a self-relieving regulator that automatically adds or exhausts air to raise or lower (float) the load to the desired height where it will remain suspended. The regulator can also be adjusted to slowly raise a load up and out of an operators way.
The primary application for the "BA" series balancer is for suspending and/or positioning constant weight items.
|
Ingersoll-Rand BW015080 Balancer Air Basic Balancer With Z-Brake, 150 lb Capacity at 100 PSI, Single Set-up The Ingersoll Rand "B" series balancers come standard with NO CONTROLS, and are designed for integration with an end effector or handling device that includes a control package.
|
|
Ingersoll-Rand BW015080S Balancer Air Basic Balancer With Z-Brake, 150 lb Cap, w/ Z-Stop
|
|
Ingersoll-Rand BAW015080 Pneumatic Balancer, BA Series, Capacity (lbs) 150
|
List Price: $3,073.60 Your Price: $2,458.87 Your Savings: $614.73!
|
|
|
List Price: $3,179.33 Your Price: $2,543.47 Your Savings: $635.86!
|
|
|
|
|
Ingersoll-Rand BW015080S Balancer Air Basic Balancer With Z-Brake, 150 lb Capacity at 100 PSI, Single Set-up, W/ Z-Stop The Ingersoll Rand "B" series balancers come standard with NO CONTROLS, and are designed for integration with an end effector or handling device that includes a control package.
|
Ingersoll-Rand BAW015080 Pneumatic Balancer, BA Series, Capacity at 100 PSI (lbs): 150, Single Set-Up Ingersoll Rand "BA" series balancers have no pendant controls and are used for single load suspending applications either at a fixed height or where both hands are used to manually raise, lower and position or “Float” a load. The operator experiences virtually no part weight or resistance in manipulating the load.
The “BA” controller is a self-relieving regulator that automatically adds or exhausts air to raise or lower (float) the load to the desired height where it will remain suspended. The regulator can also be adjusted to slowly raise a load up and out of an operators way.
The primary application for the "BA" series balancer is for suspending and/or positioning constant weight items.
|
|
Ingersoll-Rand BAW015080S Pneumatic Balancer, BA Series, Capacity (lbs) 150, W/ Z-Stop
|
|
Ingersoll-Rand BW020120 Balancer Air Basic Balancer With Z-Brake, 200 lb Cap
|
List Price: $3,524.76 Your Price: $2,819.81 Your Savings: $704.95!
|
|
|
List Price: $3,610.76 Your Price: $2,888.62 Your Savings: $722.14!
|
|
|
|
|
Ingersoll-Rand BAW015080S Pneumatic Balancer, BA Series, Capacity at 100 PSI (lbs): 150, Single Set-Up Ingersoll Rand "BA" series balancers have no pendant controls and are used for single load suspending applications either at a fixed height or where both hands are used to manually raise, lower and position or “Float” a load. The operator experiences virtually no part weight or resistance in manipulating the load.
The “BA” controller is a self-relieving regulator that automatically adds or exhausts air to raise or lower (float) the load to the desired height where it will remain suspended. The regulator can also be adjusted to slowly raise a load up and out of an operators way.
The primary application for the "BA" series balancer is for suspending and/or positioning constant weight items.
|
Ingersoll-Rand BW020120 Balancer Air Basic Balancer With Z-Brake, 200 lb Capacity at 100 PSI, Single Set-up
|
|
Ingersoll-Rand ZAW015080 Pneumatic Balancer, ZA Series, Capacity 150 lbs
|
|
Ingersoll-Rand BW035080 Balancer Air Basic Balancer With Z-Brake, 350 lb Cap
|
List Price: $3,837.77 Your Price: $3,070.21 Your Savings: $767.56!
|
|
|
List Price: $3,840.58 Your Price: $3,072.46 Your Savings: $768.12!
|
|
|
|
|
Ingersoll-Rand ZAW015080 Pneumatic Balancer, ZA Series, Capacity 150 lbs The Ingersoll Rand ZA series balancer is the most common, and is designed for high speed, precision handling of variable weight loads. Up/down movement is accomplished through the use of an ergonomically designed pendant with low-effort, color coded thumb levers. After positioning the load with the pendant control, the unit defaults into a "Float” mode that allows the operator up to 18 in (457 mm) to manually adjust the load for final positioning.
|
Ingersoll-Rand BW035080 Balancer Air Basic Balancer With Z-Brake, 350 lb Capacity at 100 PSI, Single Set-up, Does Not Include Z-Stop
|
|
Ingersoll-Rand BW020120S Balancer Air Basic Balancer With Z-Brake, 200 lb Cap, w/ Z-Stop
|
|
Ingersoll-Rand EAW015080 Pneumatic Balancer, Series EA, 150 lb Capacity
|
List Price: $3,956.19 Your Price: $3,164.96 Your Savings: $791.23!
|
|
|
List Price: $4,008.36 Your Price: $3,206.69 Your Savings: $801.67!
|
|
|
|
|
Ingersoll-Rand BW020120S Balancer Air Basic Balancer With Z-Brake, 200 lb Capacity at 100 PSI, Single Set-up
|
Ingersoll-Rand EAW015080 Pneumatic Balancer, Series EA, 150 lb Capacity Ingersoll Rand "EA" series balancers are used for handling multiple (up to 3) loads within a 40 lb (18.1 kg) weight range without the need to adjust the controls. When the pendant is in the LO- and UN-LOAD position, balancer air pressure is released to allow the lighter loads to be in balance. When the pendant is in the HI-LOAD position, no pressure is released, and the heaviest load can be balanced. The "EA" series balancers are ideally suited for applications where up to 3 load sizes are frequently lifted, and operator hands-on the part is required. The UN-LOAD position is also often used for handling device balancing (loaded/unloaded).
|
|
Ingersoll-Rand ZAW015080S Pneumatic Balancer, ZA Series, Capacity 150 lbs, W/ Z-Stop
|
|
Ingersoll-Rand BW032080S Balancer Air Basic Balancer With Z-Brake, 325 lb Cap, w/ Z-Stop
|
List Price: $4,183.19 Your Price: $3,346.54 Your Savings: $836.65!
|
|
|
List Price: $4,224.07 Your Price: $3,379.26 Your Savings: $844.81!
|
|
|
|
|
Ingersoll-Rand ZAW015080S Pneumatic Balancer, ZA Series, Capacity 150 lbs The Ingersoll Rand ZA series balancer is the most common, and is designed for high speed, precision handling of variable weight loads. Up/down movement is accomplished through the use of an ergonomically designed pendant with low-effort, color coded thumb levers. After positioning the load with the pendant control, the unit defaults into a "Float” mode that allows the operator up to 18 in (457 mm) to manually adjust the load for final positioning.
|
Ingersoll-Rand BW032080S Balancer Air Basic Balancer With Z-Brake, 325 lb Capacity at 100 PSI, Single Set-up, Available with Z-Stop
|
|
Ingersoll-Rand EAW015080S Pneumatic Balancer, Series EA, 150 lb Capacity, W/ Z-Stop
|
|
Ingersoll-Rand ZAW020120 Pneumatic Balancer, ZA Series, Capacity 200 lbs
|
List Price: $4,353.79 Your Price: $3,483.04 Your Savings: $870.75!
|
|
|
List Price: $4,631.54 Your Price: $3,705.23 Your Savings: $926.31!
|
|
|
|
|
Ingersoll-Rand EAW015080S Pneumatic Balancer, Series EA, 150 lb Capacity Ingersoll Rand "EA" series balancers are used for handling multiple (up to 3) loads within a 40 lb (18.1 kg) weight range without the need to adjust the controls. When the pendant is in the LO- and UN-LOAD position, balancer air pressure is released to allow the lighter loads to be in balance. When the pendant is in the HI-LOAD position, no pressure is released, and the heaviest load can be balanced. The "EA" series balancers are ideally suited for applications where up to 3 load sizes are frequently lifted, and operator hands-on the part is required. The UN-LOAD position is also often used for handling device balancing (loaded/unloaded).
|
Ingersoll-Rand ZAW020120 Pneumatic Balancer, ZA Series, Capacity: 200 lbs The Ingersoll Rand ZA series balancer is the most common, and is designed for high speed, precision handling of variable weight loads. Up/down movement is accomplished through the use of an ergonomically designed pendant with low-effort, color coded thumb levers. After positioning the load with the pendant control, the unit defaults into a "Float” mode that allows the operator up to 18 in (457 mm) to manually adjust the load for final positioning.
|
|
Ingersoll-Rand BAW020120 Pneumatic Balancer, BA Series, Capacity (lbs) 200
|
|
Ingersoll-Rand BAW035080 Pneumatic Balancer, BA Series, Capacity (lbs) 350
|
List Price: $4,793.68 Your Price: $3,834.94 Your Savings: $958.74!
|
|
|
List Price: $4,921.98 Your Price: $3,937.59 Your Savings: $984.39!
|
|
|
|
|
Ingersoll-Rand BAW020120 Pneumatic Balancer, BA Series, Capacity at 100 PSI (lbs): 200, Single Set-Up Ingersoll Rand "BA" series balancers have no pendant controls and are used for single load suspending applications either at a fixed height or where both hands are used to manually raise, lower and position or “Float” a load. The operator experiences virtually no part weight or resistance in manipulating the load.
The “BA” controller is a self-relieving regulator that automatically adds or exhausts air to raise or lower (float) the load to the desired height where it will remain suspended. The regulator can also be adjusted to slowly raise a load up and out of an operators way.
The primary application for the "BA" series balancer is for suspending and/or positioning constant weight items.
|
Ingersoll-Rand BAW035080 Pneumatic Balancer, BA Series, Capacity at 100 PSI (lbs): 350, Single Set-Up, Not Available with Z-Stop
Ingersoll Rand "BA" series balancers have no pendant controls and are used for single load suspending applications either at a fixed height or where both hands are used to manually raise, lower and position or “Float” a load. The operator experiences virtually no part weight or resistance in manipulating the load.
The “BA” controller is a self-relieving regulator that automatically adds or exhausts air to raise or lower (float) the load to the desired height where it will remain suspended. The regulator can also be adjusted to slowly raise a load up and out of an operators way.
The primary application for the "BA" series balancer is for suspending and/or positioning constant weight items.
|
|
Ingersoll-Rand EAW020120 Pneumatic Balancer, Series EA, 200 lb Capacity
|
|
Ingersoll-Rand ZAW035080 Pneumatic Balancer, ZA Series, Capacity 350 lbs
|
List Price: $4,936.08 Your Price: $3,948.87 Your Savings: $987.21!
|
|
|
List Price: $4,954.40 Your Price: $3,963.52 Your Savings: $990.88!
|
|
|
|
|
Ingersoll-Rand EAW020120 Pneumatic Balancer, Series EA, 200 lb Capacity Ingersoll Rand "EA" series balancers are used for handling multiple (up to 3) loads within a 40 lb (18.1 kg) weight range without the need to adjust the controls. When the pendant is in the LO- and UN-LOAD position, balancer air pressure is released to allow the lighter loads to be in balance. When the pendant is in the HI-LOAD position, no pressure is released, and the heaviest load can be balanced. The "EA" series balancers are ideally suited for applications where up to 3 load sizes are frequently lifted, and operator hands-on the part is required. The UN-LOAD position is also often used for handling device balancing (loaded/unloaded).
|
Ingersoll-Rand ZAW035080 Pneumatic Balancer, ZA Series, Capacity: 350 lbs The Ingersoll Rand ZA series balancer is the most common, and is designed for high speed, precision handling of variable weight loads. Up/down movement is accomplished through the use of an ergonomically designed pendant with low-effort, color coded thumb levers. After positioning the load with the pendant control, the unit defaults into a "Float” mode that allows the operator up to 18 in (457 mm) to manually adjust the load for final positioning.
|
|
Ingersoll-Rand ZAW020120S Pneumatic Balancer, ZA Series, Capacity 200 lbs, W/ Z-Stop
|
|
Ingersoll-Rand BW050080 Balancer Air Basic Balancer With Z-Brake, 500 lb Cap
|
List Price: $4,976.97 Your Price: $3,981.57 Your Savings: $995.40!
|
|
|
List Price: $4,978.37 Your Price: $3,982.71 Your Savings: $995.66!
|
|
|
|
|
Ingersoll-Rand ZAW020120S Pneumatic Balancer, ZA Series, Capacity: 200 lbs The Ingersoll Rand ZA series balancer is the most common, and is designed for high speed, precision handling of variable weight loads. Up/down movement is accomplished through the use of an ergonomically designed pendant with low-effort, color coded thumb levers. After positioning the load with the pendant control, the unit defaults into a "Float” mode that allows the operator up to 18 in (457 mm) to manually adjust the load for final positioning.
|
Ingersoll-Rand BW050080 Balancer Air Basic Balancer With Z-Brake, 500 lb Capacity at 100 PSI, Single Set-up
|
|