Description
Phase II MET-U1A Ultrasonic Hardness Tester w/ Output. The PHASE II ultrasonic/dynamic portable hardness testers are capable of measuring the surface hardness of a broad variety of metals on flat, round, thin or large surfaces. Unlike the standard Dynamic hardness testers, these "state-of-the-art" portable hardness testers incorporate "Ultrasonic UCI" technology, which enables the hardness testing of very thin and small workpieces, which otherwise could not be tested accurately using a portable device. Non-destructive in it's function, these hardness testers allow for the testing of highly sensitive or finished parts that previously could not be tested in an operational setting. The non-destructive (ndt) feature of these hardness testers allow the operator to accurately test parts without causing physical or structural damage that would normally lead to disposal or refinish of operators part.
- Easy To Read Menu Operation
- Large LCD Display w/ Back Light
- USB Interface
- Automatic Conversions to: Brinell, Rockwell C, Rockwell B, Vickers and Leeb
- Automatic Mean Value
- Data Archive Capacity
| Model No. Data | MET-U1A | MET-UDA |
| Probe Type | UCI 10N | Dynamic Leeb "D" |
| Tolerance | +/- 3.0% of average from the reference value of the test block with a minimum of 5 tests | +/-6 L (L=Leeb) |
| Measuring Range: | HRC: 20-67 | HRC: 20-67 |
| Applicable Test Materials | Steel & cast steel, alloy tool steel, stainless steel, grey cast iron, spheroidal iron, cast aluminum, brass, bronze, wrought copper alloy. | Steel & cast steel, alloy tool steel, stainless steel, grey cast iron, spheroidal iron, cast aluminum. |
| Minimum Thickness | .040" (Steel) | Approx. 0.472" (Steel) |
| Battery Type | NiMH (C) | NiMH (C) |
| Operating Temperature | 5-104 ° F | 5-104 ° F |
| Dimensions (Gauge only) | 145 x 80 x 40mm | 145 x 80 x 40mm |
| Weight (Gauge only): | 8.5oz | 8.5oz |
