Description
Phase II PTG-3500 Integrated Coating Thickness Gage w/ Auto-Detect. The PHASE II PTG-3500 coating thickness gauge can perform two different methods of calculating thickness measurement by utilizing the characteristics of both eddy current and magnetic induction.
- With this state of the art thickness gauge, you can easily detect the thickness of nonmagnetic coating on a magnetic substrate (ferrous) or an insulating coating on a non-magnetic conductive substrate (non-ferrous) utilizing either an integrated probe or our version that comes with 1 auto-detect external probe.
- The PHASE II PTG-3500 can be used in many areas of industry including manufacturing, general engineering, commercial inspection, etc.
- Measuring range: 0-1000 µ m max. or 0-40 mils
- Resolution: 0.1µ m / 0.1mils(0-99µ m) or 1µ m (over 100µ m)
- Guaranteed tolerance:
- After one-point calibration: +/- 1-3%n or 2µ m (whichever is greater)
- Display: 4 digits (digit height = 10mm/0.4")
- Min. measuring area: 0.2" x 0.2" (5mm x 5mm)
- Min. radius of curvature: Convex: 0.12" (3mm)
- Concave: 1.2" (30mm)
- Min. substrate thickness: Ferrous: 20 mils (0.5mm)
- Non-ferrous: 2 mils (50 µ m)
- Calibration: Zero Calibration
- Foil calibration
- Max. Surface temperature of test object: 302 degrees F (contact time max is 2 seconds)
- Power source: 4 AA batteries
- Dimensions: 161 x 69 x 32mm
- Weight: 9oz. (260g)
Product Features
Extended Information
Technical Specs
Prop 65 Warning: Product's may contain one or more substances or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm.
