Description
The Mikrotest GM Automatic uses the magnetic attraction Principle to measure electroplating and paint coatings on steel. Automatic operation means that the operator tensions the scale on the gauge which has a special tension spring built into it and the gauge controls the entire measurement process after the magnet is set on the surface. The special tension spring applies a pull-off force to the magnet until the magnet lifts off the coating at which time the scale stops turning at locks the scale automatically. The thickness can then be read off the scale.
- all coatings on steel e.g. paints, powder coating,enamels,chrome, zinc……
- increased repeatability
- measure at any angle
- no power supply required
- Automatic Operation
- 0 to 4 mils. range
- +.04 mils ± 5% tolerance
- .040" minimum base
Product Features
Extended Information
Technical Specs
Prop 65 Warning: Product's may contain one or more substances or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm.
